
自动检测语言 百度翻译APP上线了!
翻译结果 (中 > 英) 复制结果 双语对照查看
Working principle.
LMC type filter tube pulse dust collector consists of hopper, tank, filter, automatic dust blowing device etc.. When working, the dusty air from the inlet into the ash bucket, due to gravity, coarse dust particles directly into the bottom of the ash bucket, play a role in dust, while the air flow speed slow, slight dust with air turning upward into the box, dust is cartridge filter retention, accumulated and attached on the filter cylinder outer surface, the gas after filtered through the filter cartridge into the upper part of the box body net gas chamber to the outlet, the discharge into the atmosphere of induced draft fan. Accumulated dust attached to the outer wall of the cartridge is increasing, when reaching the set time or the set pressure, pulse control instrument sequential interval trigger pulse electromagnetic valve to open, compressed air in the air bag for each row tube filter pulse-jet cleaning by blowing pipe, the cartridge in the rapid expansion of product of shaking moment the dust in the outer wall of the cartridge, from dust peeling on the filter cylinder to the ash bucket, ash discharge valve discharge after.
Performance characteristics:
1, because the filter cartridge filter fold into a cylinder shape, so the filter dust collecting area in unit volume.
2, filter cartridge dust collector small height, compact structure, small volume, easy installation and maintenance.
3, filtration velocity, dust collector resistance.
4, filter made of polyester long fibers industrial filter cloth and coated polyester long fiber filter cloth, the cloth microporous filter, high precision, high efficiency, easy to clean, not easy to be blocked, working resistance and low.
5, the cartridge port with an elastic rubber ring, good sealing performance, reliable.
6, dust control with constant pressure, timing, manual control, every one of the cleaning cycle, each row cartridge are cleaning it again.
7, dust accumulation in the folded slot cartridge, make cleaning difficult, folded filter cartridge large area is only suitable for low concentration of entrance conditions.
规格
技术参数 |
LMC-20 |
LMC-40 |
LMC-60 |
LMC-90 |
过滤风量(m3/h) |
600-1200 |
1200-2400 |
1800-3600 |
2700-5400 |
过滤面积(m2) |
20 |
40 |
60 |
90 |
过滤风速(m/min) |
0.5-1.0 |
0.5-1.0 |
0.5-1.0 |
0.5-1.0 |
滤筒数量(个) |
2 |
4 |
6 |
9 |
滤筒材质 |
聚酯长纤维 |
聚酯长纤维 |
聚酯长纤维 |
聚酯长纤维 |
滤筒规格(mm) |
Ф350×Ф240
×660 |
Ф350×Ф240
×660 |
Ф350×Ф240
×660 |
Ф350×Ф240
×660 |
入口气体温度(℃) |
<120 |
<120 |
<120 |
<120 |
电磁阀型号 |
DCF-25 |
DCF-25 |
DCF-25 |
DCF-25 |
电磁阀数量(个) |
1 |
2 |
2 |
3 |
设备阻力(pa) |
1000-1200 |
1000-1200 |
1000-1200 |
1000-1200 |
排放浓度(mg/m3) |
30-50 |
30-50 |
30-50 |
30-50 |
压缩空气压力(mpa) |
0.4-0.6 |
0.4-0.6 |
0.4-0.6 |
0.4-0.6 |
压缩空气耗量(m3/min) |
0.1 |
0.2 |
0.2 |
0.3 |
箱体尺寸(mm)
可根据现场调整 |
450×1000
×2570 |
950×1000
×2570 |
950×1500
×2970 |
1450×1500
×2970 |
规格
技术参数 |
LMC-120 |
LMC-160 |
LMC-200 |
LMC-250 |
过滤风量(m3/h) |
3600-7200 |
4800-9600 |
6000-12000 |
7500-15000 |
过滤面积(m2) |
120 |
160 |
200 |
250 |
过滤风速(m/min) |
0.5-1.0 |
0.5-1.0 |
0.5-1.0 |
0.5-1.0 |
滤筒数量(个) |
12 |
16 |
20 |
25 |
滤筒材质 |
聚酯长纤维 |
聚酯长纤维 |
聚酯长纤维 |
聚酯长纤维 |
滤筒规格(mm) |
Ф350×Ф240
×660 |
Ф350×Ф240
×660 |
Ф350×Ф240
×660 |
Ф350×Ф240
×660 |
入口气体温度(℃) |
<120 |
<120 |
<120 |
<120 |
电磁阀型号 |
DCF-25 |
DCF-25 |
DCF-25 |
DCF-25 |
电磁阀数量(个) |
3 |
4 |
5 |
5 |
设备阻力(pa) |
1000-1200 |
1000-1200 |
1000-1200 |
1000-1200 |
排放浓度(mg/m3) |
30-50 |
30-50 |
30-50 |
30-50 |
压缩空气压力(mpa) |
0.4-0.6 |
0.4-0.6 |
0.4-0.6 |
0.4-0.6 |
压缩空气耗量(m3/min) |
0.3 |
0.4 |
0.5 |
0.5 |
箱体尺寸(mm)
可根据现场调整 |
1450×2000
×2920 |
1950×2000
×2570 |
2000×2450
×2720 |
2450×2500
×2720 |
|